Loading ...
Loading ...
Loading ...
USA & C
ANADA
Oven Light
MAINTENANCE
A
Pressure
regulator
Cap
LP Gas
B
Pressure
test point
Cap
Natural Gas
C
B
Pressure regulator
Stick on label
Stick the appropriate label on to the data badge to indicate the gas the appliance is now set for.
Pressure Testing
Connect the appliance to the gas supply. Check that the appliance is properly connected to gas.
The gas pressure can be measured at the pressure test point on the appliance side on the manifold, near the
pressure regulator.
5. REPLACING THE OVEN LIGHT
The light is located on the side at the top of the oven; it is
automatically switched on when the oven door is opened.
Please note: disconnect your stove before interfering with the
light to prevent any risk of an electrical shock and to allow the
appliance to cool down (if necessary).
Remove the protection glass and then unscrew the damaged
light.
Refit a new light and the protection glass.
Technical characteristics of the light:
- 25W - 230V - 240V
- 300°C - E14 base
Your selection of LA CORNUE equipment is your assurance of quality and dependability that
reflects over 100 years of experience in manufacturing the finest gas cooking equipment.
You can always rely on your dealer and the Company to stand behind every product anywhere
in the U.S.A. and in Canada. For additional equipment, service and information contact your
dealer.
Page 66
Installation Guide Château G4 - USA Canada
LA CORNUE
08NOTINSG4/ULC-1
Loading ...
Loading ...
Loading ...