Loading ...
Loading ...
Loading ...
USA & CANADA
Test OPERATION
OPERATION
IMPORTANT
Please make sure your cooker is unpacked completely before use.
Remove all tape and packaging.
Make sure that the gas burners of the hob and oven are correctly positioned and are level.
Remove the accessory pack from the oven and install the RCC disc (see page 60).
Check to be sure that no parts have come loose during shipping.
1. TESTS
Upon initial test of unit
When first testing the gas operated burners, you may find they do not operate. This is normal, and is
caused by air in the gas lines. Simply, operate each burner starting with the top burners, until all the
air is displaced by the gas and ignition will result. This may take 1 to 5 minutes.
On first use, the electronic safety device of the gas oven may switch on (the red indicator light goes
on).
Please press the reset button (G) until air is also displaced in the oven and the flame goes on.
2. STARTING WITH THE COOKTOP ELEMENTS
The gas burners on the stoves of the” La Cornue” line are fitted with safety thermocouples: should a burner
extinguish, the gas supply to this burner is automatically cut off.
2.1. Gas hobs with electric ignition (smal l, large and maxi burner)
The thermocouple should not be activated for more than 15 seconds; if, after this time, the burner has not
ignited, you should stop trying to ignite, and wait at least one minute before trying to reignite the burner.
All of our appliances are originally equipped with automatic gas burner ignition.
To ignite a gas burner, press the control knob and turn it to the left to the ”high flame” position.
The burner is automatically ignited. Keep the knob pressed for 3 – 10 seconds (the safety thermocouple may
take longer to react the first time).
Small and large burner
Maxi burner
Page 54
Installation Guide Château G4 - USA Canada
LA CORNUE
08NOTINSG4/ULC-1
Loading ...
Loading ...
Loading ...