Loading ...
Loading ...
Loading ...
MAINTENANCE Gas Pressure Regulator
WARNING
The conversion kit shall be installed by a qualified service
agency in accordance with the manufacturer's instructions and all
applicable codes and requirements of the authority having
jurisdiction. If the information in these instructions is not follo-
wed exactly, a fire, explosion or production of carbon monoxide
may result causing property damage, personal injury or loss of
life. The qualified service agency is responsible for the pro-per
installation of this kit. The installation is not proper and
complete until the operation of the converted appliance is chec-
ked as specified in the manufacturer's instructions supplied with
the kit.
3. CONVERTING FOR HIGH ALTITUDE
If the range is to be used above 3000ft the burner orifices must be changed. This conversion must be
performed by a qualified gas installer.
Read the instructions before converting this appliance.
Failure to convert the appliance correctly could invalidate any warranty or liability claims and lead to
prosecution.
When servicing or replacing gas-carrying components disconnect from gas before commencing operation.
Use the correct orifices for high altitude given by La Cornue service only for your appliance.
When you have completed the changes, check the appliance is gas sound.
CAUTION: DO NOT USE A FLAME TO CHECK FOR GAS LEAKS.
Do not use re-conditioned or unauthorized gas controls.
Save the orifices removed from the appliance for future use.
Check operation of all the burners.
After conversion the installation must comply with the relevant regulations and also the local electricity
supply company requirements.
4. GAS PRESSURE REGULATOR
Remove the grates (A), the cap of the burner (B), then the pan (C). The regulator is now accessible. The
regulator has a bayonet mounted top cap. Using a small coin (25¢) press in and turn the cap to remove it.
Turn the cap over so that the letters ”LP” (for propane gas) or ”NAT” (for natural gas) are visible on base of
the hollow in the cap. Replace the cap making sure that the bayonet pins are securely located.
USA & C
ANADA
LA CORNUE
Installation Guide Château G4 - USA Canada
Page
65
08NOTINSG4/ULC-1
Loading ...
Loading ...
Loading ...