Loading ...
Loading ...
Loading ...
35
WARNING
• Do not immerse the multi cooker housing,
power cord or power plug in water or any other
liquid as this may cause electrocution. Take
extra care when cleaning and not to allow
water or cleaning fluids to seep under the
buttons or LCD screen on the control panel.
• Do not use chemicals, steel wool, metal
scouring pad or abrasive cleaners to clean the
outside of the multi cooker housing, cooking
bowl or bread pan as these can damage the
housing or the coating of the cooking bowl,
bread pan or kneading blade.
• To prevent damage to the multi cooker,
do not use alkaline cleaning agents when
cleaning. Use a soft cloth and mild detergent.
• When moving the multi cooker, allow the
unit to fully cool down and carry the unit via
the base.
• Once cooking is complete, always clean the
interior baking chamber after each use to
remove any foodstuffs or residue.
NOTE
Exposure to cooking oils and cleaning
chemicals may cause colour fading and
discolouration to the multi cooker. If the multi
cooker is exposed to oils or chemicals, turn
off and unplug the appliance and use a damp
cloth to clean the surface of the multi cooker.
Dry thoroughly before use.
CLEANING ALL PARTS AND
ACCESSORIES
1. Remove the inner lid from the multi cooker.
Press outwards on the two grooved clips at
the same time, which will release the top
half of the inner lid. Once the inner lid flips
forward, lift out and away.
2. Wash the inner lid in warm soapy water with
mild household detergent. Rinse and dry
thoroughly. Clip the inner lid back into place
by inserting the bottom part of the inner lid
into the grooves on the outer lid, push the
upper part of the inner lid until the clips click
into place. Ensure inner lid is in place before
storage or use. Do not wash in a dishwasher.
Care, Cleaning
& Storage
Before cleaning, ensure the multi cooker is
returned to standby mode by pressing and
holding the START/CANCEL button, then
switch the multi cooker off at the power outlet.
Remove the power plug from the power outlet
and remove the connector end of the power
cord from the multi cooker base. Allow the multi
cooker and all accessories to cool completely
before disassembling and cleaning.
CLEANING THE MULTI COOKER
EXTERNAL BODY AND INNER BAKING
CHAMBER
1. Wipe the outer body and the display screen
with a damp cloth or a soft, damp sponge and
then dry thoroughly. Do not clean with a dry
cloth or abrasive cleaners as this may scratch
the surface. A non-abrasive liquid cleanser or
mild spray solution may be used to avoid
build-up of stains. Apply the cleanser to the
sponge, not the multi cooker surface, before
cleaning.
2. Use extreme caution when cleaning the
interior baking chamber and the heating
elements. Ensure the multi cooker is
completely cool before cleaning.
3. Ensure the heating plate and heating elements
are clear of debris before use. If over-spills
such as oil, flour, nuts, raisins etc. occur in the
interior baking chamber, carefully remove
using a soft, damp cloth.
4. Clean the multi cooker interior baking
chamber, heating plate and heating element
with a damp cloth, then wipe dry. Alternatively,
if any over-spills occur and fall into the multi
cooker cavity which are hard to clean, use a
brush with soft to medium bristles to brush
away the spills from the heating element or
heating plate on the base. If necessary, carefully
tip the unit upside down and give a gentle
shake to remove loose debris.
5. Let all surfaces dry thoroughly before use.
LMC600_ANZ_IB_D19.indd 35 5/9/19 4:06 pm
Loading ...
Loading ...
Loading ...