Loading ...
Loading ...
Loading ...
@
Low: Use to simmer foods, keep foods
warm and malt chocolate or butter. Some
cooking may take place on the Low
setting if the pan is covered.
High: Use to bring liquid to a boil, or reach
pressure in a pressure cooker. Always
reduce setting to a lower heat when liquids
begin to boil or foods begin to cook.
An intermediate flame size is used to
continue cooking. Food will not cook any
faster when a higher flame setting is used
than needed to maintain a gentle bo&
Water boils at the same temperature
whether boiling gently or vigorously.
Surface Controls
• If flame should go out during a cooking operation, turn
the burner off. If a strong gas odor is detected, open a
window and wait five minutes uetore relighting the
burner
- Be s_re all surface controls are set in the OFF position
prior to supplying gas to the range.
- NEVERtouch cooktop until it has cooled. Expect some
parts of the cooktop, especiaii} around the burners, to
become warm or hot during cooking, Use potholders to
Pilotless ignition
Pilotless ignition eliminates the need for a constant standing
pilot lighL Each sealed burner has a spark ignitor. When
cleaning around the surface burner use care. If cleaning cloth
should catch the ignitor, it could be damaged preventing
If the surface burner does not
light, check if ignitor is __,EAD
broken, soiled or wet. If /1/
clogged, clean tile / _,, " _ X
small port beneath (_ _ _ _#k -1
the ignitor PORTS ___
using a straight _,
pill. _ -'_- IGNITOR
PORT BELOW IGNITOR
Surface Control Knobs
Use to turn on the surface burners, An infinite choice of heat
settings is available from Low to High. At the High setting a
detent or notch may be felt. The knobs can be set on or
between any of the settings.
0 0 Graphics next to the knob identify which burner the
0 knob controls. For example, the graphic at left shows
the left front burner location.
Setting the controls:
The size and type of cookware will affect the heat setting. For
information on cookware and other factors affecting heat
settings, refer to "Cooking Made Simple" booklet.
1. Place a pan on the burner grate.
The burner flame may lift off or appear separated from
the port if a pan is not placed on the grate.
2. Push in and turn the knob counterclockwise to the Light
setting.
" A clicking (spark] sound will be heard and the burner
will light. (All four ignitors will spark when any surface
burner knob is turned to the Light position.]
3. After the burner lights, turn knob to desired flame size.
The ignitor will continue to spark until the knob is
turned past the Light position.
O#erating During a
Power Failure
controls are in the OFF position, Strike the match first and
hold it in pos!t!on bef0[e turning the knob tO Light,
1. Hold a lighted match to the desired surface burner head.
2. Push in and turn the control knob slowly to Light.
3. Once lit, adjust the flame to the desired level.
5
Loading ...
Loading ...
Loading ...