Loading ...
Loading ...
Loading ...
Oven Door
Leve ing Legs
Do not place excessive weight on or stand on an open
o_en door. This could cause [he range to tip over. break
the door. or injure the user.
Do not attempt to open or close door or operate oven until
door is properly replaced.
NeveHplace fingers between hinge and front oven frame.
Hinge arms are sprung mounted. Jf accidentally hit. the
hinge wiii siam shut against oven frame and could injure
your fingers.
Be Sure the anti:tip bracket secures one of the rear
from accidentally tipping.
To remove:
1. When cool, open the oven door to
the first stop position (opened
about four inches}.
2. Grasp door at each side. Do not
use the door handle to lift door.
3. Lift up evenly until door clears
hinge arms.
To replace:
1. Grasp door at each side.
2. Align slots in the door with the hinge arms on the range.
3. Slide the door down onto the hinge arms until the door is
completely seated on the hinges. Push down on the top
corners of the door to completely seat door on hinges.
Door should not appear crooked.
Note: The oven door on a new range may feel "spongy"
when it is closed. This is normal and will decrease with use.
Oven Window (select models}
To protect the oven door window:
1. Do riot use abrasive cbanmg agents such as steel wool
scouring pads or powdered cbansers as they may scratch
the glass.
2. Do not hit the glass with pots, pans, furniture, toys, or other
objects.
3. Do not close the oven door until the oven racks are in
place.
Scratching, hitting, jarring or stressing the glass may weaken
its structure causing an increased risk of breakage at a later
date.
i i
- Use a dry potholder to prevent possible harm to hands
• Be sure bulb is cool before touching bulb.
o Do not touch hot bulb with a damp cloth as this may cause
the bulb to break.
To Replace Oven Light Butb:
1. When oven is cool, hold bulb cover Of equipped} in place,
then slide wire retainer off cover.
Note: Bulb cover will fall if riot held in place while
removing wire retainer.
2. Remove bulb cover and light bulb.
BULB COVER
3. Replace with a @-watt appli-
ance bulb.
4. Replace bulb cover and
secure with wire retainer.
5. Reconnect power to range.
Reset clock.
WIRE
RETAINER
23
Loading ...
Loading ...
Loading ...