Loading ...
Loading ...
Loading ...
Fig. 31
Height adjustment, Y:
u
Fully screw out the screws
Fig. 31 (36)
.
w
Dispose of the screws
Fig. 31 (36)
as they will no longer
be needed.
u
Only loosen the screws
Fig. 31 (37)
with 1 to 2 turns.
u
Turn the adjusting screw (38). In a clockwise direction:
the door moves max. 4 mm upwards. In an anticlock-
wise direction: the door moves max. 2 mm downwards.
u
Retighten all screws
Fig. 31 (37)
.
Lateral adjustment, X:
u
If the screws
Fig. 31 (36)
are still present, unscrew them
fully.
u
Only loosen the screws
Fig. 31 (37)
with 1 to 2 turns.
u
Adjust the adjusting screws
Fig. 31 (39)
according to the
desired lateral adjustment direction.
u
Retighten the screws
Fig. 31 (37)
after the lateral adjust-
ment is complete.
u
Reinsert the bottle shelf
Fig. 29 (32)
and the vegetable
drawer
Fig. 29 (31)
.
Note
Make sure that the vegetable drawer is correctly inserted
and has engaged.
Otherwise, the door will not close properly.
u
Insert the vegetable drawer flush with the inner door.
4.5 Disposal of packaging
WARNING
Danger of suffocation from packaging materials and films!
u
Do not allow children to play with packaging materials.
The packaging is made from recyclable materials:
-
Corrugated card/cardboard
-
Parts made of foamed polystyrene
-
Films and bags from polyethylene
-
Packing bands from polypropylene
-
Wood frame nailed together with a polyethylene
window*
u
Take the packaging material to an official collection
point.
4.6 Connecting the appliance
WARNING
Electrical shock hazard!
u
Start-up should only take place once the appliance has
been installed according to these instructions.
u
Electrically ground appliance.
u
Do not ground to a gas pipe.
u
Check with a qualified electrician if you are not sure the
appliance is properly grounded.
u
Do not have a fuse in the neutral or grounding circuit.
u
Do not use an extension cord, power bar or a multiple
socket adapter.
u
Do not use a power cord that is frayed or damaged.
WARNING
Electrical shock hazard!
This appliance is equipped with a three-prong (grounding)
polarized plug for your protection against possible shock
hazards. Electrical Grounding Required.
u
Do not remove the round grounding prong from the
plug.
u
Use only an grounded adapter.
-
Wait 1 hour after installation before you plug in the
appliance. This allows the refrigerant and system lubri-
cation to reach equilibrium.
-
Make sure incoming voltage is the same as the appli-
ance rating. A 110-120 Volt, 60 Hz, 15 Amp electrical
supply (20 Amp for side-by-side installations) circuit
that is controlled by a circuit breaker or fuse is required.
-
We recommend using a dedicated circuit for this appli-
ance to prevent electrical overload.
-
Follow all Federal, State and local electrical, fire and
building codes and ordinances when installing the
receptacle and / or the appliance.
-
In some communities, a wall switch is required to turn
power to the appliance ON and OFF.
-
To reduce the risk of fire, electric shock, or personal
injury, installation work and electrical wiring must be
done by a qualified electrician in accordance with all
applicable codes and standards, including fire-rated
construction.
-
The Power Plug must be easily accessible so that the
appliance can be disconnected from the mains quickly
in an emergency. It must not be behind the back of the
appliance.
Start-up
14 * Depending on model and options
Loading ...
Loading ...
Loading ...