Loading ...
Loading ...
Loading ...
Fig. 19
u
For side fastening, fasten the mounting bracket with a
screw on the right and on the left in the recess.
4.3.2 Installing the unit door
u
Installing the handle on the unit door
Note
To guarantee that the pull-out compartment will pull-out
evenly:
u
Always install the unit handle in the middle of the unit
door.
Fig. 20
u
Check the 5/16 '' (8 mm) presetting. (Distance between
appliance door and lower edge of crosspiece)
u
Raise the fitting aids
Fig. 20 (12)
to unit door height.
Bottom stop edge of â–²the fitting aid = top edge of the
unit door to be fitted.
u
Unscrew the crosspiece
Fig. 20 (11)
by undoing the
locknuts
Fig. 20 (10)
.
Fig. 21
u
Hang the crosspiece
Fig. 21 (11)
on the inside of the unit
door using the fitting aids
Fig. 21 (12)
.
With a 23-5/8 '' (600 mm) wide recess:
u
Align the crosspiece
Fig. 21 (11)
to the middle of the
door.
Fig. 22
With a 24-1/32 '' (610 mm) wide recess:
u
Align the crosspiece
Fig. 22 (11)
to the middle of the
door.
u
Left strip: Move the crosspiece
Fig. 22 (11)
1/4 (6 mm) to
the left.
-or-
u
Right strip: Move the crosspiece
Fig. 22 (11)
1/4 (6 mm)
to the right.
For chipboard doors
u
Secure the crosspiece
Fig. 21 (11)
with at least 6 screws
Fig. 21 (19)
.
For frame and panel doors
u
Secure the crosspiece
Fig. 21 (11)
with 4 screws
Fig. 21 (19)
at the edge.
u
Lift up fitting aids
Fig. 21 (12)
, turn round and insert into
the adjacent openings.
Fig. 23
Start-up
* Depending on model and options 11
Loading ...
Loading ...
Loading ...