Loading ...
Loading ...
Loading ...
CARE AND CLEANING
Self-Cleaning Cycle
The door gasket is designed to have
a 5"-6" gap at the bottom of the door
This allows for proper air circulation
Door Panel Gasket
lm
2_
1
Remove the broiler pan and grid,
utensils, and any foil that may be in
the oven.
If your oven is equipped with
nickel oven racks, they should be
removed If your oven is equipped
with gray porcelain-coated oven
racks, they may stay in the oven
during the self-clean cycle.
Soil on the front frame and outside
the gasket of the door liner will need
to be cleaned by hand
Front Frame
Clean these areas with hot water,
soap-filled pads, or cleansers such as
Soft Scrub ® to remove any soil. Rinse well
with clean water and dry
Do not use oven cleaners-no commercial
oven cleaner or protective coating of any
kind should be used in or around any part
of the oven
,
5.
Wipe up any heavy spiitovers on the
oven bottom.
Do not clean the door gasket_
The fiberglass material of the oven
door gasket cannot withstand
abrasion. It is essential for the gasket
to remain intact. If you notice it
becoming worn or frayed, it should be
replaced
Door Liner
It is normal for your oven door to give
the appearance of not having a good
seal against the oven This is due to
the gasket. The location of the gasket
on the door maintains a good seal and
prevents any heat loss
Utensils should never
be left in the oven
during a clean cycle.
Nickel oven racks may
be cleaned during the self-clean
cycle, but will lose their luster
and become hard to slide. If you
choose to leave them in during
the cycle, wiping them with
vegetable oil after the cycle will
help them slide easier.
Gray porcelain-coated oven
racks may safely be cleaned in
the oven during a self-clean
cycle. Wiping them down with
vegetable oil after the cycle will
help them slide easier.
For the first clean cycle, vent the
room with an opened window or
hood vent. This will reduce the
odor produced when heating
new parts.
IIiir , ,
,,*_
26
Loading ...
Loading ...
Loading ...