Loading ...
Loading ...
Loading ...
WARNING – SERVICING TO BE CARRIED OUT ONLY BY AN AUTHORISED PERSON
Disconnect from electricity and gas supplies before servicing. Check appliance is safe when you have nished.
45
ArtNo.320-0006 Oven door hinge adjustment 1
Eect of hinge adjustment – exagerrated for clarity
ArtNo.320-0001 Door hinges
1
ArtNo.320-0001 Door hinges
2
ArtNo.320-0007 Oven door hinge adjustment 2
Centreline of hinge pin
Oven door omitted for clarity
ArtNo.322-0002 Oven bottom element access
A
BB
Fig. 12.8
Fig. 12.9 Fig. 12.10
Fig. 12.11
Fig. 12.12
5.6 To Remove the Left-hand Oven Bottom and Top
Elements
DISCONNECT FROM THE ELECTRICITY SUPPLY.
Bottom Element
Pull the cooker forward to access the cover boxes at the rear
of the unit. Remove the xings that secure the cover and lift
it clear.
Remove the 2 screws ‘A’ and allow the plate to drop down
(Fig. 12.8). Remove the 2 screws ‘B’ lower the upper plate and
remove through the slot in the range back (Fig. 12.8). Undo
the terminal connections, noting their positions. Withdraw
the element.
Remove the element screws and withdraw element. Replace
the element and re-assemble parts in reverse order.
Top Element
Open the left-hand oven door and undo the xings that
secure the heat shield. Remove the top element bracket
xings and withdraw the element.
Replace the element and reassemble parts in reverse order.
Check that the oven operates satisfactorily.
6 Doors
6.1 To Remove the Grill Door
Remove the left-hand side panel (see 1.3). Remove the plinth
(4 screws) and the central vertical cover (5screws). Remove
the 2 countersunk screws (1 each side) securing the grill
hinge arms to the front of the grill chamber.
Note: The arms are spring tensioned. Carefully remove the
grill door. Retain the gaskets.
Reassemble in the reverse order, making sure that the gasket
is tted between the hinge arm and the front of the grill
chamber.
6.2 To Replace the Main Oven Door
Open the oven door. Support the door and loosen the 2
screws securing the upper hinge and gasket to the cooker
front (Fig. 12.9).
n
The door is heavy, so take care.
Support the door and remove the screw nearest the hinge
pin (Fig. 12.10). Swing the hinge up and away from the
door hinge pin. Lift the door away from the lower hinge and
remove.
Reassemble in reverse order.
6.3 To Adjust the Main Oven Door Angle
The bottom hinge of either oven door can be adjusted to
alter the angle of the door (Fig. 12.11). Loosen the bottom
hinge xing screws and use the notch and a at bladed
screwdriver to move the position of the hinge to set the
hinge position (Fig. 12.12).
Retighten the hinge screws.
Loading ...
Loading ...
Loading ...