Loading ...
Loading ...
Loading ...
WARNING – SERVICING TO BE CARRIED OUT ONLY BY AN AUTHORISED PERSON
Disconnect from electricity and gas supplies before servicing. Check appliance is safe when you have nished.
44
Element xing screws
ArtNo.321-0005 Fan oven element
Fig. 12.7
5.2 To Remove an Oven Element Thermal Cut-out
DISCONNECT FROM THE ELECTRICITY SUPPLY.
Pull the cooker forward to gain access to the cover box. Undo
the cover screws and lift clear. The cut-out is located on the
earth plate beside the oven element connections. Disconnect
the cut-out wiring. Undo the xings that secure the cut-out to
the earth plate and remove.
Fit the replacement control and reassemble in reverse order.
5.3 To Remove an Oven Inner Back
DISCONNECT FROM THE ELECTRICITY SUPPLY.
Open the door and remove the shelves. Remove the screws
and washers securing the inner back to the back of the oven
(Fig. 12.5). Carefully lift away the inner back.
Reassemble in reverse order making sure that the screws and
washers are fully tightened.
5.4 To Remove an Oven Element
DISCONNECT FROM THE ELECTRICITY SUPPLY.
Remove the oven inner back (see 5.3). Remove the 2 screws
from the top of the element and the one from the bottom of
the element inside the oven (Fig. 12.7).
Lift the element out carefully, disconnecting the terminals
connected to the element (noting their positions).
If it is not possible to disconnect the leads in this way, pull the
cooker forward to gain access to the rear.
Remove the screws securing the electric cover to the back
sheet, remove the cover and disconnect the terminals from
the rear.
5.5 To Replace an Oven Fan
DISCONNECT FROM THE ELECTRICITY SUPPLY.
Pull the cooker forward to gain access to the rear. Remove
the screws securing the electric cover to the back sheet and
remove the cover.
Disconnect the 3 terminals connected to the fan noting their
position. Remove the oven inner back (see 5.3). Hold the fan
blade and remove the centre nut (left-hand thread) 2 brass
washers, fan blade and circlip. Unscrew the fan retaining nuts
and washers (3 o each) and lift the fan away from the rear of
the cooker.
Fit the new fan and reassemble in reverse order. Check the
operation of the oven.
Loading ...
Loading ...
Loading ...