Loading ...
Loading ...
Loading ...
Use Web Services
The printer oers innovative, cloud-based solutions, such as print anywhere, scan-and-save to cloud, and
other services (including supplies auto replenishment). For more information, visit the HP Smart website
(www.hpsmart.com).
NOTE: To use these cloud-based solutions, the printer must be connected to the Internet. Unless otherwise
agreed, HP can modify or cancel these cloud-based solution oerings at its discretion.
Set up Web Services
1. Before you set up Web Services, make sure your printer is connected to the Internet.
2. Open the printer home page (the embedded web server or EWS). See To access and use the Embedded
Web Server (EWS).
3. Click the HP Web Services tab.
4. In Web Services Settings, click Enable, and follow the on-screen instructions to accept the terms of use.
5. If prompted, choose to allow the printer to check for and install printer updates.
NOTE:
● If prompted for a password, enter the PIN from the label on your printer. See Things to note when
accessing EWS.
● If prompted for proxy settings and if your network uses proxy settings, follow the on-screen
instructions to set up a proxy server. If you do not have the details, contact your network
administrator or the person who set up the network.
● If a printer update is available, the printer downloads and installs the update and then restarts
automatically. Repeat the instructions above to set up HP Web Services.
6. After the printer is connected to the HP server, the printer prints an information sheet. Follow the
instructions on the information sheet to nish setting up Web Services.
40 Chapter 6 Congure your printer ENWW
Loading ...
Loading ...
Loading ...