Loading ...
Loading ...
Loading ...
Connect your printer to a Wi-Fi network using HP Smart
NOTE: This section is applicable to wireless printers only.
Install the HP Smart app on your computer or mobile device and use the app to set up or connect the printer
to your Wi-Fi network.
For information about HP Smart including where to download the app, see Use the HP Smart app to print,
scan, and manage.
1. Make sure your computer or mobile device is connected to your Wi-Fi network. On your mobile device,
turn on Bluetooth and location services.
NOTE: HP Smart uses Bluetooth for printer setup. It does not support Print using Bluetooth.
2. If your printer Wi-Fi was previously turned o, make sure to turn it on. For more information about
wireless status, see To turn on or o the wireless capabilities of the printer.
3. If the printer is no longer in wireless setup mode, restore the printer network settings. See To restore
network settings to default settings.
NOTE: For some printers or models, the purple light will start pulsing in the Status light bar or the
Wireless light will blink when the printer is in wireless setup mode.
4. Open the HP Smart app on your computer or mobile device. See Use the HP Smart app to print, scan, and
manage.
5. From HP Smart, click or tap (the Plus icon) or Add Printer, and then choose the option to select or
add a printer. If prompted, allow Bluetooth and location permissions.
Follow the instructions to add the printer to your network.
6. When prompted, create an HP account and register the printer.
NOTE: When the printer is connected successfully, the Wireless light stops blinking and remains lit (for all
Wireless models). See Printer views.
14 Chapter 2 Connect your printer ENWW
Loading ...
Loading ...
Loading ...