Loading ...
Loading ...
Loading ...
pg-8
IMPORTANT INFORMATION
This device is tested as a 0.05% BAC device (0.05%BAC is equal to 0.05grams of alcohol per 100ml of
blood).
ALCOLIMIT RBT Wallmount has a range of 0.000-0.250 %BAC.
PLEASE NOTE: Alcohol vapour on your breath will cause a higher reading. We recommend having a glass of
water prior to testing and waiting at least 20 minutes after your last drink for accurate results. Not waiting the
required 20 minutes will saturate the sensor unnecessarily and may cause sensor damage. This is not covered
under your warranty. Please always wait 20 minutes after consuming any alcohol to avoid this problem.
Version 1.0
RESULTS DISPLAYED & INTERPRETATION
When the measurement is complete, the blood alcohol concentration (eg. 0.052%BAC) will appear on
the LCD display.
A visual guide on the front panel will indicate whether or not a person is aected by alcohol. We do not
recommend drinking and driving or working with any amount of alcohol in a person’s system.
The message for each level is:
PASS = 0.000%BAC
Very little or no alcohol has been detected.
CAUTION = 0.001-0.049%BAC
A moderate amount of alcohol has been detected.
FAIL = 0.050%BAC upwards
A high level of alcohol has been detected.
PRECAUTIONS
1. During testing, any alcohol traces left in a person’s mouth will increase the value of the blood
alcohol concentration level. Remove these traces before testing. Wait 20 minutes after drinking
or consuming medications with alcohol before testing.
2. When a person exhales through the straw, some unintentional salivation may aect the built-in
equipment. However, please be aware that placing any other liquids or materials into the straw
may cause the sensor to malfunction.
3. Cigarette smoking may also increase the blood alcohol concentration value. Allow ten minutes
after smoking before testing.
SEE WARNINGS SECTION FOR FURTHER PRECAUTIONS
RBT Wallmount
©
AlcoLimit
©
Loading ...
Loading ...
Loading ...