Loading ...
Loading ...
Loading ...
pg-6
INSTALLATION
Version 1.0
Installation should be performed by a qualied tradesperson.
We recommend 2 people perform this installation for ease of aligning the unit.
To install the RBT Wallmount Breathalyser on a wall you will need:
1 x Drill (not included)
1 x Philips-head screwdriver (not included)
2 x Screws & Wall plugs to suit the wall you will attach the unit to (not included)
1 x RBT Wallmount Breathalyser (included)
1 x Power pack (included)
1. Have person 1 hold the unit while the other person marks the holes in the wall with a
pencil. (Simply fold the back panel out and put it against the wall, then stencil the holes
on the wall with a pencil).
2. Put the breathalyser down, drill holes and insert wall plugs or your preferred tting.
3. Fold out the back panel and insert the screws (or chosen tting) through the holes in the
back panel into the wall. Ensure it is secure.
4. The breathalyser is now attached and you should be able to pull the front panel outward
from the wall and access the inside for servicing.
5. To secure the breathalyser from tampering always lock the casing with the key provided
6. Plug in the power pack underneath and plug it into a power socket. You may feed it
through a wall or use conduit to secure it to the wall and run it to the power point.
7. Turn on the power point and the unit will power up ready for use.
Please phone AlcoLimit Customer Service on 1300 667 661 if you have any questions regarding
installation.
RBT Wallmount
©
AlcoLimit
©
Loading ...
Loading ...
Loading ...