Loading ...
Loading ...
Loading ...
pg-6 pg-7
BASIC OPERATION
Version 1.0
ON-SCREEN GUIDANCE
Below are the steps followed by the user of the RBT Wallmount and the on-screen guidance.
The following is displayed until the start button is pressed:
KNOW YOUR LIMIT. CHECK YOUR ALCOHOL LEVEL.
PUSH BUTTON AND TAKE A STRAW.
The device will then prepare for testing:
WARMING UP, PLEASE WAIT….
When it is ready for testing the following will appear:
BLOW STEADILY UNTIL TONE ENDS
“SAMPLING”
The user will then need to blow into the unit for 5 seconds until the following appears:
SAMPLING IS COMPLETED.
“ANALYSING”
If you stop blowing or you do not breathe strongly enough, “Flow Error” will be displayed on LCD.
The device does not sense a proper breath sample, please wait and try again and the machine will
automatically prepare for a retest.
This process will continue until you nally obtain a correct result.
If the %BAC result reaches the maximum limit on the RBT (over 0.250%BAC) the software will pre-
vent another test for approximately 4 minutes. This is a safety precaution to prevent people using
the device for drinking games.
RBT Wallmount
©
AlcoLimit
©
Loading ...
Loading ...
Loading ...