Loading ...
Loading ...
Loading ...
47
TROUBLESHOOTING
Concern Potential Cause Common Solution
Water/Moisture/Frost Inside Refrigerator
Moisture
collects on
inside of
refrigerator
walls.
• Weather is hot and
humid.
• Flipper mullion
• The rate of frost buildup and
internal sweating increases.
• Adjust flipper mullion. (See “To
adjust the flipper mullion” in the
Installation section.)
Water
collects on
bottom side
of drawer
cover.
• Vegetables contain and
give o moisture.
• It is not unusual to have moisture
on the bottom side of the cover.
Move humidity control (some
models) to lower setting.
Water
collects in
bottom of
drawer.
• Washed vegetables
and fruit drain while in
the drawer.
• Water collecting in bottom of
drawer is normal. Dry items before
putting them in the drawer or store
produce in tightly sealed bags to
help reduce condensation inside of
the drawer.
Water/Moisture/Frost Outside Refrigerator
Moisture
collects on
outside of
refrigerator
or between
doors.
• Weather is humid. • This is normal in humid weather.
When humidity is lower, the
moisture should disappear.
Food in Fresh Food Compartment
Food is
freezing.
• Temperature setting is
too low.
• Temperature sensor is
covered by food (right
side of fresh food area).
• Food is covering the air
ports.
• Move the setting to a higher
degree.
• Allow space for air flow to the
sensor.
• Allow space between the air ports
and the food.
Loading ...
Loading ...
Loading ...