Loading ...
Loading ...
Loading ...
30
CAUTION
To avoid personal injury or property
damage, handle tempered glass shelves
carefully. Shelves may break suddenly
if nicked, scratched, or exposed to
sudden temperature change. Allow
the glass shelves to stabilize to room
temperature before cleaning. Do not
wash in dishwasher.
You can easily adjust shelf positions in
the refrigerator compartments to suit
your needs. The shelves have mounting
brackets that attach to slotted supports
at the rear of each compartment.
STORAGE FEATURES
IMPORTANT
Be aware of the air seal located at the rear
of the shelf. Shelves located on the left
side should have the air seal mounted on
the far left side. Shelves located on the
right side should have the air seal mount-
ed on the far right side. This is to ensure
there is no interference with the large air
tower on the back wall of the cabinet. This
also applies to the crisper shelves.
Change the Position of a Shelf
1. Remove all food from shelf.
2. Lift the front edge up and pull the
shelf out.
Reposition the Air Seal
For glass shelves:
1. Remove air seal by pushing seal
straight back.
2. Position the air seal towards the
outside edge of the shelf to avoid the
air tower when shelf is pushed back
into place.
3. Install seal by sliding the open channel
end of the seal onto back edge of
shelf until seal sits snug on back
of shelf and flap sits at about a 10
degree angle from shelf surface.
To adjust slide-under shelf
1. Push front half shelf backward
towards rear of cabinet until the
rear half
shelf drops
down, then
gently
continue
pushing
front half
shelf back
and under
the rear
half shelf.
Slide-Under Shelf
Shelves
3. Replace by inserting the mounting
bracket hooks into the desired
support slots.
4. Lower the shelf and lock into position.
Loading ...
Loading ...
Loading ...