Loading ...
Loading ...
Loading ...
! I illll ΒΈ JllJlllllJllll,,i,uil,l,lllllll,ll,l,ll,,i u,l,i iil, lllll,llll,l,l,,, ii i
I UNPACKING, SAFETY GUIDES
UNPACKING -This owners manual
was on a cardboard packing piece On
the same cardboard piece are al! the
small parts you will need to install the
softener (not including plumbing pipe
and fittings) _So you don't lose any parts,
keep them on the cardboard until you
are ready to use them. Remove all other
cardboard pieces, foam packings, tape,
etc., frorr_ the softener and discard.
Check the softener for shipping dam-
age If you find damage, call your Sears
store for help
Use care when handling the softene[
DO NOT turn upside-down. DO NOT
drop, or set on sharp objects that will
make a hole in the bottom
OWNERS
MANUAL
INLET-OUTLET
ADAPTOR (2)
!
/
GROUND
CLAMP (2) HO
TRANSFORMER _ CLAMP (2)
GROUNDWlRE,
SCREWS AND NUTS
INLET
SCREEN
CLIP (2)
...-- GROMMET
HOSE ADAPTOR
SAFETY GUIDES
I
A Read all steps, guides and rules carefully be-
fore installing and using your new water softener.
Follow all steps exactly to correctly install. Fai-
lure to follow them could cause personal injury or
property damage. Reading this book will also
help you to get all of the benefits from your water
softener,
A Your water softener will remove hardness
minerals and "clear water" iron from water, up to
the limits shown on page 28. It will not remove
other types of iron, acids, tastes and odors, etc. It
will not purify polluted water or make it safe to
drink.
A Check with your local public works depart-
ment for plumbing, electric and sanitation
codes. You must follow their guides as you
install your softener.
A Use only LEAD-FREE SOLDER AND FLUX,
as required by Federal and State codes, when
installing soldered copper plumbing.
A Protect the softener and piping from freezing.
Damage from freezing voids the softener war-
ranty. See page 23.
PLEASE READ AND COMPLY WITH THE
FOLLOWING GUIDES TO PREVENT
DAMAGE TO THE SOFTENER OR OTHER
PROPERTY, PERSONAL INJURY, OR POSSI-
BLE FATAL SHOCK.
A THIS SOFTENER WORKS ON 24 VOLTS
ONLY. BE SURE TO USE THE TRANS-
FORMER INCLUDED, AND PLUG IT INTO A
120V OUTLET.
_, Be sure the electric outlet for the softener
is grounded the right way.
A Unplug the transformer right away if the
power cable should become damaged or
frayed. Make repairs before plugging back in-
to the power outlet.
A Always unplug the softener from electrical
power before removing outer valve covers=
When you see this sign in the book, A something could be damaged, or someone hurt, if the guide is
not followed exactly.
Loading ...
Loading ...
Loading ...