Loading ...
Loading ...
Loading ...
9
10
11
11. Identify the Right Handlebar (48), which is
marked with a “Right” sticker, and orient it as
shown. Make sure that the hexagonal holes
are in the location shown.
Attach the Right Handlebar (48) to the right side
of the Upright (3) with two M8 x 38mm Button
Bolts (53) and two M8 Locknuts (37). Make
sure that the Locknuts are in the hexagonal
holes.
Attach the Left Handlebar (47) in the same
way.
10. Attach the Water Bottle Holder (49) to the
Upright (3) with two M4 x 22mm Screws (69).
49
3
69
47
Hexagonal
Holes
48
53
37
3
12. The Console (6) can use four D batteries (not
included); alkaline batteries are recommended.
Do not use old and new batteries together or
alkaline, standard, and rechargeable batteries
together. IMPORTANT: If the Console has
been exposed to cold temperatures, allow it
to warm to room temperature before insert-
ing batteries. Otherwise, you may damage
the console displays or other electronic
components. Remove the screws and the bat-
tery covers, insert batteries into the battery
compartments, and reattach the battery covers.
Make sure to orient the batteries as shown
by the diagrams inside the battery
compartments.
To purchase an optional power adapter, call
the telephone number on the front cover of
this manual. To avoid damaging the console,
use only a manufacturer-supplied power
adapter. Plug one end of the power adapter
into the receptacle on the console; plug the
other end into an outlet installed in accordance
with all local codes and ordinances.
6
Batteries
Batteries
Screws
Battery
Covers
12
Loading ...
Loading ...
Loading ...