Loading ...
Loading ...
Loading ...
8
7
8
7. Attach the Seat (12) to the Rear Frame (43)
with four M6 x 40mm Screws (40) and four M6
Washers (70).
8. Orient the Upright (3) and the Top Shield (9) as
shown. Slide the Top Shield upward onto the
Upright.
Have a second person hold the Upright (3) and
the Top Shield (9) near the Front Frame (1).
Connect the Upper Wire (32) to the Lower Wire
(31). Then, connect the Upper Pulse Wire (55)
to the Lower Pulse Wire (56).
Insert the wires downward into the Front Frame
(1).
Tip: To prevent the wires from falling into
the Upright (3), secure the wires with a rub-
ber band or tape.
70
40
32
31
9
3
55
56
40
70
43
12
1
9. Tip: Avoid pinching the wires. Slide the
Upright (3) onto the Front Frame (1).
Attach the Upright (3) with four M8 x 16mm
Screws (35) and four M8 Split Washers (36).
Press the Top Shield (9) downward into the Left
and Right Shields (17, 18).
9
3
9
35
35
35
35
36
17
18
36
1
36
36
Avoid pinching
the wires
Loading ...
Loading ...
Loading ...