Loading ...
Loading ...
Loading ...
10
13. While a second person holds the Console (6)
near the Upright (3), connect the wires on the
Console to the Upper Wire (32) and to the
U
pper Pulse Wire (55).
I
nsert the excess wire into the Upright (3) or
into the Console (6).
Tip: Avoid pinching the wires. Attach the
Console (6) to the Upright (3) with four M4 x
16mm Screws (64).
Then, attach the Handlebar Cover (19) to the
Upright (3) with two M4 x 16mm Screws (64).
13
6
64
55
32
64
19
3
Avoid pinching
the wires
14. Identify the Right Pedal (26), which is marked
with an “R” sticker.
Using an adjustable wrench, firmly tighten the
Right Pedal (26) clockwise into the right arm of
the Crank (13). Tighten the Left Pedal (not
shown) counterclockwise into the left arm of
the Crank.
Adjust the strap on the Right Pedal (26) to the
desired position, and press the end of the strap
onto the tab on the Right Pedal. Adjust the
strap on the Left Pedal (not shown) in the
same way.
15. Make sure that all parts are properly tightened before you use the exercise bike. Note: After assembly
is completed, some extra parts may be left over. Place a mat beneath the exercise bike to protect the floor.
14
13
26
Tab
Strap
Loading ...
Loading ...
Loading ...