Loading ...
Loading ...
Loading ...
Check Brake Operation
Check Tire Pressure
"[ Check for Loose Fasteners
sharpen/'Replace Mower Blades
C Lubrication Chart ............
T Check Battery Leve.i{aechar.ge
0 C{ean Battery and Terminals
R CheckTransaxle Cooling
Adjust Blade Belt(s) Tension
Adjust Motion Drive Belt(s) Tension
...............
j .............
Check Engine Oil Level _' 6#4
CHangeEngine Oi!.................. _#' LI _2,3[ ..... 6#4
Clean Air Filter
E ...................................... ..............
a cleanAir Screen..................... ............. ...............
G Inspect Muffler/Spark Arrester .........
I ReplaceOil Filter (If equipped) .........
N Clean.Engine .....
Fins
Replace Spark Plug .........
Replace Air Filter Paper Cartridge .......
Replace Fuei FiIter
: . ......... ,..
1 - Change more otten when operating under a heavy teed or in high ambient _emperetures
2 - Service more otten when operating in dirty or dusty conditions
3 - If equipped wilh oil fitter, change oil every 50 hours
4 - Replace blades more often when mowing in sandy soil
5 - 11equipped with adiustable system
6 - Not required if equipped with maintenance4ree battery
7 - Tighten front axte pivot bo_t to 35 ft -Ibs maximum
Do not overtighten,
GENERAL RECOtVtMENDATQONS
The warranty on this tractor does not cover items that have
been subjected to operator abuse or negligence. To
receive full value from the warranty, operator must maintain
tractor as instructed in this manual
Some adjustments will need to be made periodically to
properly maintain your tractor
All adjustments in the Service and Adjustments section of
this manual should be checked at least once each season_
o Once a year you should replace the spark plug, clean
or replace air filter, and check blades and belts for
wear. A new spark plug and clean air filter assure
proper air-fuel mixture and help your engine run better
and last longer..
BEFORE EACH USE
- Check engine oil level
• Check brake operation.
o Check tire pressure..
° Check for loose fasteners..
IMPORTANT: DO NOT OIL OR GREASE THE PIVOT POINTS
WHfCH HAVE SPEC{AL NYLON BEARINGS.. VISCOUS LUBRI-
CANTS WILL ATTRACT DUST AND D_RT THAT WILL SHORTEN
THE LiFE OF THE SELF-LUBRICATING BEARINGS. tF YOU
FEEL THEY MUST BE LUBRICATED, USE ONLY A DRY, POW-
DERED GRAPHITE TYPE LUBRICANT SPARINGLY
(_ SPRAY SILICONE LUBRICANT (MOVE BOOTS TO LUBRICATE)
(_) GENERAL PURPOSE GREASE
_') REFER TO CUSTOMER RESPONSIBIUT1ES "ENGINE" SECTEON
17
Loading ...
Loading ...
Loading ...