Loading ...
Loading ...
Loading ...
15
X E19 5 STEP THREE
HARDWARE FOR STEP 3
PART TYPE DESCRIPTION QTY
101 BOLT
5/16”X1-1/4”
2
142 FLAT WASHER
Ø5/16” × Ø20 × 1.5T
2
192 NYLOC NUT
5/16”X9T
2
1. Gather HARDWARE FOR STEP 3.
2. Untie the twist tie that holds each bushing to
the Connecting Arm end. Align the hole in the
end of the CONNECTING ARMS (L & R)
(8 & 9) with the hole in the bracket of the
SWING ARMS (L) AND (R), (10 & 11).
The CONNECTING ARM ends should be
inside of the SWING ARM (L) AND (R), (10
& 11) brackets. Slide a HEX HEAD BOLT
(101) through each SWING ARM (L) AND
(R), (10 &11) bracket and each Connecting
Arm end.
3. Slide a FLAT WASHER (142) onto each bolt,
then fasten the arms together by tightening a
NYLOC NUT (127) to each bolt using the
WRENCHES provided (109 & 106).
Loading ...
Loading ...
Loading ...