Loading ...
Loading ...
Loading ...
10. Light Kit Assembly (Optional).
page 9
If you wish to use the light kit, remove all 3 screws
on outer edge of switch housing cap on top of
light kit.
Connect WHITE wire from motor housing to
WHITE wire from light kit. Connect BLACK wire
from motor housing to BLACK wire from light kit.
Be sure molex connections snap together securely.
Carefully arrange wiring within switch housing
located on underside of motor housing. Align
holes in switch housing with holes in switch
housing cap. Re-insert screws that were previously
removed and secure all 3 screws with a Phillips
screwdriver.
Install two 4 watt LED bulbs (included).
Important: When replacing bulbs, please allow
bulb(s) and light kit to cool down before touching
them.
If you do NOT wish to use the light kit, remove hex
nut on threaded rod inside switch housing cap on
the top part of the light kit. Remove switch
housing cap. Remove all 3 screws on outer edge of
switch housing cap. Align holes in switch housing
with holes in switch housing cap. Re-insert screws
that were previously removed and secure all 3
screws with a Phillips screwdriver. Cover hole with
plug in one of the hardware packs.
battery
cover
remote control
transmitter
(backside)
battery
11. Remote Control Operation.
If you wish to use the remote control bracket,
install screws, included in remote pack, through
bracket and into the desired installation site. The
remote control transmitter rests inside the bracket.
CAUTION: The remote control transmitter can be
programmed to multiple receivers or fans. If this is
not desired, turn wall switch o to any other
programmable receiver or fan.
Remove battery cover from back of remote control
transmitter. Install one 12-volt battery, size A23,
(included) with positive (+) end toward top of
remote control transmitter. Replace battery cover.
WARNING: Choking Hazard - Small parts. Keep
battery away from children.
["Remote Control Operation" continued on next
page.]
remote control bracket
wall
bracket
screws
light
kit
light
kit
threaded rod
LED Bulb
switch housing cap
switch housing cap
plug
hex nut
LED Bulb
motor
housing
switch
housing
switch
housing
molex
connections
Loading ...
Loading ...