Loading ...
Loading ...
Loading ...
___Automat c speaker setup
Error messages
If any error message is displayed during the measurement, resolve the problem and perform YPAO again.
message
TV screen
Front display
Procedure to handle errors
Checkthe content of error message and
press ENTER.
Use the cursor keys (</_>) to select the
desired operation.
To exit the YPAO measurement:
(_) Select "EXIT" and press ENTER.
(_) Use the cursor keys ( / ) to select "Exit" and press
ENTER.
(_) Disconnect the YPAO microphone from the unit.
To retry the YPAO measurement from
beginning:
Select "RETRY" and press ENTER.
To proceed with the current YPAO
measurement (for E-5 and E-9 only):
Select "PROCEED" and press ENTER.
E-I:No Front SP
(E-I:NO FRNT SP)
E-2:No Sur. SP
(E-2:NO sun SP)
Front speakers are not detected.
One of the surround speakers cannot be
detected.
Keep the room quiet and retry YPAO. If you select
E-5:Noisy The noise is too loud. "PROCEED", YPAO takes the measurement again and
(E-5:NOISY) ignores any noise detected.
E-7:No MIC
(E-7:NO MIC) Tile YPAO microphone has been removed, andC°nneCtretryttleyPAo.YPAOmicrophone to the YPAO MIC jack firmly
Connect the YPAO microphone to the YPAO MIC jack firmly
E-8:No Signal The YPAO microphone cannot detect test and retry YPAO. If this error occurs repeatedly, contact the
(E-8:NO SIGNAL) tones, nearest authorized Yamaha dealer or service center.
E-9:User Cancel
Tile measurement has been canceled. Retry or exit YPAO as necessary.
(E-9:CANCEL)
E-10:lnternal Err. Exit YPAO, and turn off and on tile unit. If this error occurs
An internal error has occurred, repeatedly, contact the nearest authorized Yamaha dealer or
(E-10:INTERNAL) service center.
Exit YPAO, turn off the unit, and then check the speaker
connections.
• Texts in parentheses denote indicators on the front display.
PREPARATIONS • Optimizing the speaker settings automatically (YPAO) En 31
Loading ...
Loading ...
Loading ...