Loading ...
Loading ...
Loading ...
®
_ Speaker placement ___ _,_
Setting the speaker impedance
(U.S.A. and Canada models only)
Under its default settings, the unit is configured for 8-ohm speakers. When connecting
6-ohm speakers, set the speaker impedance to "6 _-!MIN". In this case, you can also
use 4-ohm speakers as the front speakers.
Before connecting speakers, connect the power cable to an AC wall
outlet.
While holding down STRAIGHT on the front panel, press _ (power).
0 (power)
4
STRAIGHT
Check that "SP IMP." is displayed on the front display.
Press STRAIGHT to select "6 _! MIN".
Press _ (power) to set the unit to standby mode and remove the
power cable from the AC wall outlet.
You are now ready to connect the speakers.
PREPARATIONS • Placing speakers En 14
Loading ...
Loading ...
Loading ...