Akai AK-FL10 10kg Front Load Washing Machine

User Manual - Page 23

For AK-FL10.

PDF File Manual, 36 pages, Read Online | Download pdf file

Loading ...
Loading ...
Loading ...
After Sales Support
(AU) 1300 886 649 (NZ) 0800 836 761 | tempo.org/support
23
Instructions (Cont.)
Step-by-step washing instructions
1. Connect: Plug the machine in, switch on the power to the outlet and open the
water tap.
2. Load: Open the door of the washer and load the machine following the guidelines
on the previous page.
Mixing both large and small items gives better wash results and also helps
distribute the load evenly during spinning. You will
achieve the most efficient energy and water use when
washing a full load. However, do not overload the
machine as this causes creases and reduces cleaning
efficiency.
When your washing is properly loaded in the machine,
close the door and ensure that no items are caught in
the door (Fig. 13).
3. Add detergent: Pull out the detergent dispenser and add detergent as required,
then close the dispenser (see page 21 for instructions).
4. Select a program: Rotate the Program dial to switch on the washing machine
and select the required program. Always check your clothing labels for
recommended wash and care instructions (see page 29).
5. Select a temperature: Press the Temp. button and select a wash temperature.
6. Start: Press the Start/Pause button.
7. Finish: At the end of the wash program, the buzzer will sound to alert you that
the program has finished. The machine will change into standby mode after
10 minutes of inactivity. Turn the dial back to the [ O ] position. Unplug the washing
machine from the power supply and close the water tap.
8. Unload: Open the door and unload the washing machine. We recommend you
leave the door slightly ajar so the drum can dry properly and to prevent mould
and odour development.
Instructions (Cont.)
Fig. 13
AUTOMATIC BALANCE CONTROL
The machine is fitted with a balance control device, which ensures the machine is
stable during the spin cycle. To protect the machine, it will cut in if the laundry is not
evenly distributed in the drum. The laundry is redistributed by reverse rotation of the
drum. This may happen several times before the unbalance disappears and normal
spinning can resume.
If after 15 minutes the laundry is still not evenly distributed in the drum, the machine
will not spin. In this case, please redistributed the load manually and reselect the spin
program.
Loading ...
Loading ...
Loading ...