Loading ...
Loading ...
Loading ...
After Sales Support
(AU) 1300 886 649 (NZ) 0800 836 761 | tempo.org/support
13
Installation (Cont.)
WARNING!
Never lay down the drain hose as water will be discharged.
Be sure the drain hose is properly routed so it will not kink or lift off the sink.
Leave the drain hose affixed to the back of the machine.
Drain hose connection into a standpipe (Fig. 7)
• Firstly, form a hook in the end of the drain hose using the
supplied drain hose elbow (Fig. 6).
• Place the drain hose into your standpipe, which should
have an internal diameter of approximately 30 mm, thus
ensuring there is an air break between the drain hose and
standpipe.
• When discharging into a standpipe, ensure that the drain
hose reaches at least 30 cm into the standpipe, and the top
of the standpipe is no more than 90 cm and no less than 60 cm above floor level
(Fig. 7).
FROST PROTECTION
Do not install the washing machine in places where temperatures drop to below 0 °C.
The reliability of the electronic control unit may be impaired at temperatures below
freezing point, and the machine’s inlet valve and draining systems may get damaged
as frozen hoses may burst or split.
If temperatures drops to below 0 °C, transfer it to an area with a warmer ambient
temperature before use and ensure no residual water is frozen in hoses and pipes.
Fig. 6
“Elbow”
supplied
Fig. 7
Loading ...
Loading ...
Loading ...