Loading ...
Loading ...
Loading ...
After Sales Support
(AU) 1300 886 649 (NZ) 0800 836 761 | tempo.org/support
20
Before first use
Instructions (Cont.)
Door lock
• The door of the front load washing machine locks automatically when the machine
is working. It cannot be opened without first pausing the wash program. To unlock
the door, press the Start/Pause button. Then turn the program dial (knob) to the [ O ]
position: the door will unlock after approximately two minutes.
• The door will not unlock when the temperature inside the drum is above 53 °C, and/
or when the water is above a certain level.
• At the end of a wash program, the door will unlock after two minutes.
• Suds may flow out of the open door if it is opened during the wash cycle. Beware of
suds escaping from the machine and have a cloth/towel ready for catching spills.
CAUTION!
Make sure the washing machine is properly and securely installed before using it.
Before using the washing machine for washing clothes, run a complete washing
cycle without clothes, using the drum clean program.
CAUTION!
For your safety, do not turn the program dial to the position [ O ] position, open the
machine and access the washing while the machine is running, or when the power
supply is cut off. The water temperature may be high and it may scald you. The door
will automatically unlock at the end of a wash program when the temperature of the
drum has cooled down.
Do not attempt to open the door forcibly. Doing so is unsafe and will cause damage
to the locking mechanism.
Before using the washing machine for the first time, please review the following
important points and make sure you have completed all preparatory steps.
• All transit bolts are removed.
• The washing machine is stable and level. If necessary, adjust the levelling feet to
stabilise the machine (see page 11).
• The water supply hose is properly installed (see page 14) and the water tap is open.
• The power plug is firmly inserted into a nearby power point and power is switched
on to the outlet.
• The drain hose is properly installed and secured into the laundry sink or a
standpipe (see pages 12–13).
• IMPORTANT! Before using the washing machine for the first time, run a complete
drum clean program without laundry items and without any detergent. This will
ensure any residual water from factory quality checks is removed from the tub.
Loading ...
Loading ...
Loading ...