Loading ...
Loading ...
Loading ...
21
en
Troubleshooting
TROUBLESHOOTING
PROBLEM CAUSE REMEDY
The local air conditioner
does not come on
• no electricity
• it is not plugged into the mains
• the safety device has tripped
• wait
• plug into the mains
• contact your service centre
The local air conditioner
works for a short time only
• the air exhaust hose has a constriction
• the air exhaust hose is blocked
• there are bends in the air exhaust hose
• position the exhaust hose correctly
• check there are no obstacles obstructing
air discharge
• eliminate the bends
The local air conditioner
works, but does not cool
the room
• window open
• there are heat sources in the room
(burner, lamp, etc)
• the exhaust hose is detached
• air lter clogged
• the local air conditioner is not
powerful enough forthe conditions or
size of the room
• close the window
• eliminate the heat source
• connect the exhaust hose
• clean or replace the lter
Particular odour inthe
room
• air purifying lters clogged • clean or replace the lters
The local air conditioner
does not operate for about
3 minutes after turning
it on
• the safety device has tripped • wait for three minutes
The alarm light Q comes
on
• the tank inside the appliance is full. • empty the tank (see "End of season
operations) on page 20).
Self-diagnosis
The appliance has a self diagnosis system to identify a number of malfunctions. Error messages are displayed on the appliance
display.
IF IS DISPLAYED IF IS DISPLAYED IF IS DISPLAYED
“Low Temperature”
MEANS: room temperature is
too low
“High Temperature”
MEANS: room temperature is too high
“Probe Failure”
(sensor damaged)
MEANS: contact your local customer
service