Loading ...
Loading ...
15
en
Description/Use
DESCRIPTION
1 air outlet grille
2 control panel
3 handles
4 castors
5 lter
6 evaporator air intake grille
7 air exhaust hose housing
8 condenser air intake grille
9 power cable
10 drain hose with 2 caps
11 ange with cap
12 air exhaust hose
13 hose adapter (2 pieces)
14 wall mounting accessory
15 window outlet
16 remote control unit (some models only)
USE
Electrical connections
Before plugging the appliance into the mains socket, check
that:
• The mains power supply corresponds to the value
indicated on the rating plate on the back of the
appliance;
• The mains socket and electrical circuit are adequate for
the appliance;
• The mains socket matches the plug. If this is not the
case, have the plug replaced;
• The mains socket is adequately earthed. Failure to
follow these important safety instructions absolves the
manufacturer of all liability.
Danger! The power cable must be replaced by a
qualied professional only.
Important! Before use, make sure the air intake
and outlet grilles are unobstructed.
The instructions below will enable you to prepare your local
air conditioner for operation as eciently as possible.
Air-conditioning without installation
Just a few simple steps and your comfort isensured with your
local air conditioner:
• Screw one of the hose adapters 13 to oneend of the air
exhaust hose 12.
• Fit the other adapter 13 to the air exhaust hose housing
7 at the back of the appliance (see g. A).
• Screw the end of the hose without adapter to the
adapter previously mounted on the appliance (see g.
A).
• Fit the window outlet 15 to the airexhaust hose 12 as
shown in g. B.
2
1
• Place the local air conditioner near a window or French
window.
• Make sure the air exhaust hose is unobstructed.
• Open the window or French window slightly and
position the outlet 15 as shown in gure C.
Important! Keep the air hoses as short and free of
curves as possible to avoid constrictions.
A
B
C
Loading ...
Loading ...
Loading ...