Loading ...
Loading ...
Loading ...
20
en
lter as shown in gure L.
Use a vacuum cleaner to remove the dust collected on the
lter. If it is very dirty, immerse in warm water and rinse
a number of times. The water should never be hotter than
40°C. After washing, leave the lter to dry.
Put the lter back in its housing.
Start of season checks
Make sure the power cable and plug are undamaged and the
earth system is ecient. Follow the installation instructions
precisely.
End of season operations
To drain all water from the circuit, rst unscrew in the
anticlockwise direction the external cap from the drain hose
on the back of the appliance then remove the internal cap
(gure M) and allow the water to drain out into a basin.
When all the water has been drained, close the hose with the
2 caps. Clean the lter and leave it to dry before putting it
back in its housing.
Cleaning
L
M
Loading ...