Loading ...
Loading ...
Loading ...
Air-conditioning with installation
If required, your appliance can also be installed semi-
permanently (Fig. D).
Proceed as follows:
• Drill a hole (ø134mm) in an outside wall orthrough a
window pane. Respect the height and dimensions of
the hole given in gure E.
Important! Keep the air hoses as short and free of
curves as possible to avoid constrictions.
• Fit the wall ange accessory 11 provided in the hole.
• Fit the air exhaust hose 13 in the relevant hose 7 located
on the rear side of the appliance (see g. A).
• Screw the wall mounting accessory 14 from the air
exhaust hose 12 or, if necessary, unscrew the hose
adapter 13 from the air exhaust hose 12 and replace it
with the wall installation terminal 14 (g. F).
• Insert the other end of the hose 12 onthe ange 11 as
shown in g. G.
• When the hose 12 is not tted, the hole canbe closed
with the ange cap 11.
Please note: When installing the local air conditioner
semi-permanently, you should leave a door slightly
open (as little as 1 cm) to guarantee correct ventilation.
Use
16
D
F
G
E
in the window
pane
in the wooden
kickboard of a French
window
in the wall: you are
recommended to
insulate the section
of wall using
suitable insulation.
MAX100 cm
MIN 35 cm
Loading ...
Loading ...
Loading ...