Loading ...
Loading ...
Loading ...
33
WI-FI CAMERA SETTINGS
1 2
3
4
5
6
NOTE: THE MOTION DETECTION MASK FEATURE MAY NOT BE AVAILABLE ON ALL WI-FI CAMERA MODELS.
IMPORTANT: Please note that if the camera's motion detection sensitivity level is currently set to MAX, the Motion Detection
Mask set here will not take effect. To apply the Motion Detection Mask, ensure the camera's motion detection sensitivity level
is any level below MAX, such as CLOSE, MED or FAR. You can adjust the camera's motion detection sensitivity by going to the
Devices tab > [your camera] > Detection Settings or the Modes tab > Edit.
The Motion Detection Mask can reduce unwanted motion triggers. It does this by excluding certain areas from
detection, such as nearby bushes or trees swaying in the wind, the road where people or vehicles regularly pass
by, and high trafc areas
Tap 'Add Mask' then use your nger to highlight the areas of the camera view that you want to exclude from
motion detection. All areas highlighted in blue will be excluded from motion detection. If movement is detected in
those areas, the camera will not trigger and record video.
Tap 'Remove Mask' then use your nger to erase currently highlighted areas of the camera view.
Tap 'Fill' to highlight the entire camera view. This will exclude all areas from motion detection.
Tap 'Clear' to completely remove all highlighted areas from the camera view.
Tap to save the Motion Detection Mask setting.
Tap to discard any changes and return to the previous screen.
1
2
3
4
5
6
Motion Detection Mask
Loading ...
Loading ...
Loading ...