Loading ...
Loading ...
Loading ...
28
The name of the device. You can tap to change it.
The connection status of your device. Note: If the device is not
"Online", check your Wi-Fi/internet connection and the device's
battery level/power connection.
The name (SSID) of the Wi-Fi network to which your camera is
connected. If you have multiple Wi-Fi networks in your home, you
can tap
to change the Wi-Fi connection the device is using.
The signal strength of the Wi-Fi network the device is currently
connected to. The signal strength is represented as a percentage,
and the closer the device is to your Wi-Fi router or access point, the
higher the percentage and the more reliable and faster the wireless
connection between devices.
View technical information about the device such as the model
code, rmware version, installation date, and IP address.
Remove (unpair) the device from your Swann Security account.
Note: In some cases, you might need to unpair your device. For
example, if you want to use your device with a different Swann
Security account or if you give away your device to a family
member, it must be unpaired rst.
You can change the settings for the siren such as the volume,
duration, and sound effect. See below for more information.
2
3
4
5
6
7
1
1
2
3
4
5
6
7
WI-FI SENSOR / SIREN SETTINGS
The settings available vary depending on the device and will only
appear if the feature is supported.
Slide left or right to decrease or increase the volume of the siren.
You can also completely mute the siren when triggered and only
ash the red and blue LED light ring by setting the Speaker Volume
to 0%.
Use the slider to set how long the siren will sound when
triggered.
You can change the siren alarm tone. There are four alarm tones
to choose from:
— Siren
— 'Ding Dong' Chime
— 'Beep Beep' Alert
— Human Voice "Sensor Triggered"
2
3
1
1
2
3
SIREN SETTINGS
Loading ...
Loading ...
Loading ...