Loading ...
Loading ...
Loading ...
Changing pre-set options
Wash temperature
Controlled Cold
If your incoming cold water temperature is very low you will get a less effective wash. The
CONTROLLED COLD option solves this problem by adding a small amount of hot water to raise
the temperature of the wash to approximately 68°F (20°C).
To program the CONTROLLED COLD temperature option:
1
Enter Option Adjustment mode (refer to page 38).
2
For the WL4027P model: select the HEAVY cycle (Fig.29).
For the WL4027G model: select the REGULAR cycle (Fig.30).
3
Select COLD wash temperature by using the WASH TEMP button (if not already selected).
4
The digital display shows the temperature adjustment possible. The default setting is ,
iethe temperature of the incoming water from the cold cylinder (tank).
Touch the MORE button so or is displayed. Your washer will now control the cold
temperature to approximately 68°F (20°C).
Wash Temp
OOB Recovery
Factory Reset
EOC Beeps
Fig.29 Changing the Cold wash temperature setting to Controlled Cold (WL4027P)
Wash Temp
OOB Recovery
Factory Reset
EOC Beeps
Fig.30 Changing the Cold wash temperature setting to Controlled Cold (WL4027G)
OOB
Recovery
Factory
Reset
Wash
Temp
EOC
Beeps
OOB
Recovery
Factory
Reset
Wash
Temp
EOC
Beeps
Note: if you always use COLD or CONTROLLED COLD water, we recommend that a WARM or
HOT wash be used regularly, eg every 5th wash should be at least a warm one to maintain the
cleanliness of your washer.
40
US
CA
Loading ...
Loading ...
Loading ...