Loading ...
Loading ...
Loading ...
14
US
CA
Operating instructions
Before you do your first wash
For best performance your AquaSmart™ should be installed by a qualified or experienced installer.
Before you start, it is a good idea to go through the following checklist:
1
Has the base packer been removed?
2
Is the drain hose threaded through the ‘U bend’ hose guide (with no
more than ¾” (20 mm) extended) and hooked on to your standpipe
or tub / sink?
3
Is the hot hose connected to the hot valve marked ‘H’?
Is the cold hose connected to the cold valve marked ‘C’?
4
Is the washer leveled correctly, with the feet extended and cabinet
corners clear of the floor? Refer to pages 10 and 11.
5
Have you performed the installation test cycle? Refer to page12.
WARNING!
Electric Shock Hazard
Read and follow the IMPORTANT SAFETY INSTRUCTIONS outlined in this
User Guide before operating this appliance, pages 3 – 5.
Failure to do so can result in death, electric shock, fire or injury to
persons.
Loading ...
Loading ...
Loading ...