Loading ...
Loading ...
Loading ...
13
Clock and Timer
Power Failure
If “PF” appears in the display, you had a power
failure. When the power went out, the current time
was stored in the control’s memory. Then, when the
power was restored, the time of day was continued.
For example, after a 5-minute power interruption,
your clock will be 5 minutes slow.
To reset the clock, press the CLOCK pad. Enter the
correct time of day by pressing the appropriate
number pads.
To check the time of day when the display is
showing other information, simply press the
CLOCK pad. The time of day shows for as long as
your finger is on the pad, plus 3 additional seconds.
If you have several clocks in your kitchen, you may
wish to blank the time of day on your oven.
If so, press and hold the CLOCK pad, then press the
STOP TIME pad. Although you cannot see it, the
clock maintains the correct time of day. It will
reappear for the duration of any function that displays
a Start Time and Stop Time.
Pressing the CLOCK pad will make the time of
day reappear.
NOTE: The time of day cannot be changed during a
lower oven cooking operation.
Questions and Answers
Q. When I came home, the display showed “PF”
instead of the time. What happened?
A. Your home had a brief power failure while you
were gone. Nothing is wrong with your clock—
just reset it.
Q. When changing the time of day, if I press the
CLOCK pad and then discover that the time
shown is right, do I have to reset the clock?
A. No. The original time of day will reappear in a
couple of minutes.
Q. Can I change the clock while I’m cooking food
in the lower oven?
A. No. The clock cannot be changed during any
program that uses the oven timer or the display.
You must either stop those programs or wait until
they are finished before changing the time.
Q. Can I check the time of day while the display is
showing timer function?
A. Yes. Simply press the CLOCK pad and the time of
day shows for as long as your finger is on the pad,
plus 3 additional seconds.
Loading ...
Loading ...
Loading ...