Loading ...
Loading ...
Loading ...
Installation
*INSTALLATION*
100
If the mains connection cable is dam-
aged, it must only be replaced with a
specific mains connection cable of the
same type (available from the Miele
Customer Service Department). For
safety reasons, such replacement may
only be carried out by a qualified spe-
cialist or the Miele Customer Service
Department.
These operating instructions and the
data plate indicate the nominal power
consumption and the appropriate fuse
rating. Compare this information with
the data of the on-site electrical con-
nection.
If in any doubt, consult a qualified elec-
trician.
Do not connect the refrigeration appli-
ance to a stand-alone inverter such as
those used with an autonomous energy
source, e.g. solar power. When the refri-
geration appliance is switched on,
power surges could result in an auto
switch-off. This could damage the elec-
tronic module.
Connecting the appliance
Insert the plug connector into the
socket at the back of the refrigeration
appliance.
Make sure that the plug connector has
clicked into position correctly.
Insert the mains plug into the mains
socket and switch on.
The appliance is now connected to the
electricity supply:
will appear on the display.
Follow the steps described in “Switch-
ing on and off – Switching on”.
Loading ...
Loading ...
Loading ...