Loading ...
Loading ...
Loading ...
30
5. Problemas, Causas e Soluciones
Las Mezcladoras de Carne , fueran diseñadas para que necesiten un mínimo de
manutención. Sin embargo pueden ocurrir algunas irregularidades en su funcionamiento,
debido al desgaste natural causado por su uso. Caso haya algún problema con su maquina,
verifique la Tabla – 02 abajo , donde están indicadas algunas soluciones recomendadas .
* La vida de servicio - 2 años para la jornada de trabajo normal
TABLA 02
PROBLEMS CAUSES SOLUTIONS
Las palas paran durante la
operación
Caída de la energia eléctrica
La corea esta gasta
La llave eléctrica de seguridad
no esta funcionando
El cable eléctrico ó la flecha está
dañado
La flecha está fuera de la toma
La tapa no está cerrada
fiermemente
Verifique si la flecha está en
la toma
Llame la Assistencia Técnica
Llame la Assistencia Técnica
Verifique si el cable eléctrico
no está interrumpido, controle
los pernos de la flecha
Ponga la flecha en la toma
Cierre correctamente la tapa
Humo ó olor a quemado
Problema con el circuito
eléctrico interno ó externo
Problema con el motor
Llame la Assistencia Técnica
Llame la Assistencia Técnica
Cuando la mezcladora es
prendida, las palas giran
despacio
Capacitor de parda del motor
esta dañado
Llame la Assistencia Técnica
Ruidos anormales Rodamientos dañados Llame la Assistencia Técnica
El cable elécco está dañado Problema durante el transporte Llame la Assistencia Técnica
11
IMPORTANT
If any item from the GENERAL SAFETY NOTIONS secon is not applicable to your
product, please disregard it.
The following safety instrucons are addressed to both the operator of the machine as
well as the person in charge of maintenance. The machine has to be delivered to the
operator in perfect condions of use by the Distributor to the user. The user shall operate
the machine only aer being well acquainted with the safety procedures described in the
present manual. READ THIS MANUAL WITH ATTENTION.
4.1 Basic Operaon Pracces
4.1.1 Dangerous parts
Some parts of the electric devices are connected to high voltage points. These parts when
touched may cause severe electrical shocks or even be fatal.
Never touch commands such as buons, switches and knobs with wet hands , wet clothes
and/or shoes. By not following these instrucons operator could be exposed to severe
electrical shocks or even to a fatal situaon.
4.1.2 Warnings
The operator has to be well familiar with the posion of ON/OFF Switch to make sure the
Switch is easy to be reached when necessary. Before any kind of maintenance, physically
remove plug from the socket.
Provide space for a comfortable operaon thus avoiding accidents.
Water or oil spilled on the floor will turn it slippery and dangerous. Make sure the floor is
clean and dry.
Before giving any manual command (switch, buons, turn keys or lever) be sure the
command is the correct one. Check this manual for further details if necessary.
Never use a manual command (switch, buons, lever) unadvisedly.
If any work is to be made by two or more persons, coordinaon signs will have to be given
for each operaon step. Every step of the operaon shall be taken only if the sign has been
made and responded.
4. General Safety Pracces
Loading ...
Loading ...
Loading ...