Loading ...
Loading ...
Loading ...
Basic safety instructions
6
2.2 Organisational measures
e operating and installation instructions must always
be kept ready at the location where the machine is used.
In addition to the operating and installation instruc-
tions, observe and follow the generally valid legal reg-
ulations and any other binding regulations for accident
prevention and environmental protection.
Such obligations may also include handling hazard-
ous substances or making available/wearing personal
protective equipment and complying with road trac
regulations, for example.
Supplement the operating and installation instruc-
tions by instructions as well as site management and
reporting obligations concerning special operational
requirements, for example with regard to work organ-
isation, workows, personnel used, etc.
Any personnel instructed to perform work on the
machine must have read the operating instructions
before starting work, specically the section entitled
"Safety instructions". Reading the instructions aer
work has begun is too late. is applies in particular to
personnel who only work on the machine occasionally,
for example for set-up and maintenance.
At least occasionally, check that the personnel are work-
ing with safety and hazards in mind and are following
the operating instructions.
Personnel must not have long hair which is not tied
back or wear loose clothing or jewellery including rings.
ere is a risk of injury from being caught or drawn
into the machine, for example.
Wear personal protective equipment if necessary or
required by regulations.
Observe all safety and hazard notices on the machine.
Ensure that all safety and hazard notices at/on the
machine can be read in full at all times.
In the event of any modication to the machine or any
change in the machine's performance that may aect
safety, shut down the machine immediately and report
the fault to the responsible specialist dealer.
Do not modify, convert or attach equipment to the
machine without approval from the manufacturer if
this could impair safety. is also applies to tting and
adjusting safety equipment and valves, as well as for
welding on supporting parts.
Use only genuine spare parts from the manufacturer.
ese comply with the technical requirements and
safeguard your warranty and guarantee rights. Adhere
to the prescribed time periods or those indicated in the
operating and installation instructions for recurring
tests/inspections.
Workshop equipment which is appropriate for the work
is mandatory for carrying out maintenance measures.
Make personnel aware of the location of re extinguish-
ers and how to use them.
Comply with the re alarm and reghting procedures.
2.1 Intended use
e product has been constructed using state-of-the-art
technology and in line with the recognised technical
safety regulations. However, use of this product may
still result in the risk of injury or death to the user or
third parties, or of damage to the product and other
material assets.
Only use the product in technically perfect working
order, for its intended use and with safety and hazards
in mind, in compliance with the operating and instal-
lation instructions. In particular, you must immediately
rectify faults that could impair safety or have such faults
rectied immediately by a third party.
e product is exclusively intended to be installed on
the machines approved by the manufacturer and is
intended for the accessories approved by the manufac-
turer. Any other or additional form of use, for example
use in conjunction with self-constructed accessories,
shall be regarded as non-compliant with the intended
use. is product is solely intended for sweeping ap-
plications as part of grounds maintenance and winter
road maintenance. Any other or additional form of use
is considered non-compliant with the intended use.
For example, the product must not be used to sweep
animal feed. Bristles can come loose and be consumed
by animals, harming the animal. e manufacturer/
supplier shall not be held liable for any damage or loss
suered as a result. e risk is borne solely by the user.
Intended use also includes complying with the oper-
ating and installation instructions and adhering to the
inspection and maintenance conditions.
is sweeper may only be operated with brushes that
have been approved by the manufacturer.
e implement is solely intended for clearing dirt on
roads, foliage and snow. Any other applications are
not permitted.
Unauthorised operators:
Persons who are not familiar with the operating in-
structions, minors and persons under the inuence
of alcohol, drugs or medication must not operate the
implement.
2 Basic safety instructions
Loading ...
Loading ...
Loading ...