Loading ...
Loading ...
Loading ...
Maintenance and care
7.3 Cleaning the implement
You should clean the sweeper regularly to keep it in good condition.
Remove loose dirt or dust using a so๎ brush. Wash the plastic surfaces using water and soap. Use commercial
cleaning agents for vehicles. Any cleaning agent residues must be thoroughly rinsed o๎ with clean water. Please
use a plastic care product to make plastic parts shine. Please observe the usage guidelines supplied with the care
product. Glycerine can be used to protect heavily loaded parts against corrosion (e.g. the mounting rods for the
debris container).
IMPORTANT:
Chemical or aggressive cleaning agents must not be used under any circumstances. Doing so will
permanently damage the plastic surfaces and paintwork.
Only use readily biodegradable cleaning agents and care products. This will help to protect the en-
vironment and avoid groundwater pollution.
Cleaning the machine using high-pressure cleaners, steam cleaners and similar devices can per-
manently damage components like ball bearings, seals, engine parts and plastic parts, among oth-
ers. In addition, this can result in water entering the engine. We therefore recommend keeping any
cleaning device hoses a reasonable distance from at-risk components. The water temperature must
not exceed 50 ยฐC.
Please observe any relevant operating instructions for the engine as well.
9) Once both of the brushes have been mounted, push
the washer and the cap onto the axle.
42
8) Push the le๎-hand sweeper brush onto the axle.
Observe the above assembly instructions.
10) Now secure the sweeper brushes using the lock
nut. (Hold the nut at the other end of the axle still)
Loading ...
Loading ...
Loading ...