Loading ...
Loading ...
Loading ...
Maintenance and care
7.2 Replacing the sweeper brushes
IMPORTANT:
The sweeper brushes must be checked at least every 20 operating hours. If your sweeping results
become less than satisfactory or the diameter of the brushes is 220 mm or less, the brushes have to
be replaced. The proper functioning of the sweeper is only guaranteed if original sweeper brushes
with black and white bristles produced by the manufacturer are used.
DANGER!
Switch off the engine. Secure the lawn tractor against being started inadvertently or rolling away.
1) Undo the nut on the le-hand sweeper brush using
a 19 mm combination spanner (hold the nut on
the other sweeper brush still using another 19 mm
combination spanner).
3) Pull out the axle with the second sweeper brush.
2) Now unscrew the nut and remove the brush.
41
Washer
Cap
Lock nut
Right-hand brush
Axle
4) Parts aer disassembly. Replace old brushes with
new ones.
Black
White
IMPORTANT: The black brush row must touch the
ground before the white brush row when moving
in the direction of rotation.
Undo the nut
Le-hand brush
6) When installing the new sweeper brushes, the right-
hand brush is attached to the axle rst. Observe the
above assembly instructions.
Read the operating instructions provided by the lawn tractor manufacturer.
7) Installation information: e recess on the sweeper
brush is placed on the pin on the drive.
Recess
Pin
Loading ...
Loading ...
Loading ...