Loading ...
Loading ...
Loading ...
11 Exploded drawings
IMPORTANT:
The "Remarks" column helps you to identify parts.
Only use genuine spare parts from the manufacturer. This ensures that the implement will work reliably.
Item numbers in brackets are wear parts.
IMPORTANT:
You can identify the parts under "Remarks". Please only use genuine spare parts supplied by the
manufacturer. This is the only way to guarantee the safe operation of the machine.
Troubleshooting and rectifying issues
47
Fault
Sustained grating noise when
the sweeper brush is switched
on
The sweeper brushes are not
turning or stop under load
The sweeper leaves an un-
swept strip in the centre
Poor sweeping results
Poor sweeping results with the
debris container
Snow is pushed back by the
brush
Possible cause
- incorrectly installed belt
- incorrectly installed belt
- defective V-belt
- forward ejection direction
when the sweeper brush is
worn
- worn sweeper brush
- incorrectly installed sweeper
brush
- excessive brush pressure
- not using original brushes
- debris container mounted
incorrectly, sealing lip above
the brush cover
- excessive snow depth
- solid, packed snow
- forward ejection direction,
snow accumulates in front of
the brush
How to rectify the fault
Have V-belt adjusted by a specialist
workshop
Have V-belt replaced by a specialist
workshop
Swivel brush to the right or left; lat-
eral ejection direction
Replace sweeper brush
Install sweeper brush correctly,
check running direction, adjust sup-
port wheel, reduce brush pressure,
use original sweeper brushes with
black and white bristles
Mount debris container correctly
Only usable up to a max. snow
depth of 14 cm
Swivel brush all the way to the right
or left
Swivel brush to the right or left; lat-
eral ejection direction
e terms of the manufacturer's guarantee apply within
the territory of the Federal Republic of Germany.
is guarantee applies to the proper operation of the
implement in accordance with the intended use, pro-
vided that the implement is properly handled and the
information in the operating instructions is complied
with.
is guarantee does not cover damages arising as a
result of normal wear and tear on wear parts such as
10 Terms of the guarantee
lter elements, spark plugs, tyres, bulbs, friction linings,
V-belts and blades, or as a result of improper handling,
negligent use, installation of non-original spare parts,
inadequate care and/or maintenance or failure to com-
ply with the operating instructions.
Outside of the Federal Republic of Germany, the terms
of the guarantee as issued by our responsible national
representative apply.
Loading ...
Loading ...
Loading ...