Loading ...
Loading ...
Loading ...
Page 31
ENGLISH
TROUBLESHOOTING & WARRANTY
SYMPTOMS POSSIBLE CAUSE SOLUTIONS
Washer not
lling properly
Filter clogged.
Inlet hoses may be
kinked Insufcient water
supply.
The washer lid is open.
Hot and cold inlet hoses
are reversed.
Water level is too low.
Water inlet valve
damaged.
Disassemble the water inlet hose and
clean the inlet point. Check that inlet
hoses are not kinked or clogged.
Make sure that both hot and cold
water faucets are turned on all the
way.
The washer will not operate if the
lid is open. Close the lid and make
sure that nothing is caught under
the lid preventing it from closing
completely. Check inlet hose
connections. Make sure the hot
water supply is connected to the
hot inlet valve, and the cold water
supply is connected to the cold inlet
valve.
This is a high efciency washer. The
water will not normally cover the
clothes.
The ll level is optimized for the
wash motion to achieve the best
wash performance.
Call to the service center for service.
Water leaks
every load
Hoses not installed
correctly.
Check all ll and drain hose
connections to ensure that they are
tight and secure.
Loading ...
Loading ...
Loading ...