Loading ...
Loading ...
Loading ...
BEFORECALLINGFORSERVICE
PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTION
Oven emits
odor.
a. Oven insulation may
emit odor during the
first few usages
b. Failure to wipe out
excess soil
a. Put oven through self-clean cycle
to speed up process of odor
"wearing off"
b. Wipe excess soil off before
using oven
Oven door
accidentally
locked while
baking.
Do not force the lock
handle Temperatures
above the locking
temperature will
prevent the lock handle
from sliding to the
unlock position
Turn the control knob to the off
position Allow the oven to cool until
the temperature inside drops below
the lock temperature and the handle
slides easily
Cleaning a. Oven was heavily
results were soiled
poor. b. Clean cycle
interrupted
ao Heavy spillovers should be
cleaned before the cycte is set
b. Allow the oven to clean its ful!
cycle
"F--and a You have a function If a function error code appears
number or error code during the self-cleaning cycle, check
letter" flash the oven door latch The latch may
in the display have been moved, even if only
slightly, from the locked position
Make sure the latch is moved to the
right as far as it will go Turn the oven
temperature control knob to OFF
Allow the oven to cool for one hour
Put the oven back into operation
If the function code repeats,
disconnect all power to the range for
at least 30 seconds and then
reconnect power If the function error
code repeats, calf for service
3O
Loading ...
Loading ...
Loading ...