Loading ...
Loading ...
Loading ...
CAREANDCLEANING
RemovableParts(cont.)
TO REMOVE
To remove the drip bowls for
cleaning the elements must be
removed first
1 Push the element back toward the
receptacle to free the locking tab
from the cooktop
cAuT,oN:- Oonot............
operate the cooktop |
elements without the drip
bowl in place. Scorching of |
the cooktop, burning of wiring |
insulation and loss of energy |
, W!!!OCcur" ............................ J
TO REPLACE THE UNIT
I Replace the drip bowl into the
recess in the cooktop Make sure
the opening in the bowl lines up
with the receptacle
2 Insert the terminals of the element
through the opening in the drip
bowl and into the receptacle
Bowl
2 Lift the element about 1 inch
above the drip bowl and pull it out
r(f_,_ ¢AUTU{}N: Do not lift "_
the element more than 1". |
If you do, it may not lie flat on
the drip bowl when you plug it
NOTE: Repeated tifting of the
element more than 1 inch above the
drip bowl can permanently damage
the receptacle
TO CLEAN THE DRIP BOWL
For brown food stains Use
dishwashing detergent warm water
plastic scouring pads mild abrasive
cleaners soap filled scouring pads
or ammonia Clean drip bowls after
each use Rinse and dry well Foods
that are not removed can cause
permanent stains that cannot be
removed For heavity soiled bowls
place them in a covered container (or
a plastic bag) with 1/4cup of ammonia
to loosen the soil then gently scrub
the bowl with a plastic scouring pad
•Locking
Tab
, Drip Bowl
Rim
,Locking Tab
When properly seated, the locking tab should
lock onto the cooktop rim through the notch
in the drip bowl,
3 Push the element in and down to
lock the tab in place so it rests
eveniy in the cooktop
CAUTION:
Do not immerse the
elements in liquids of any kind.
Do not clean the elements in a
dishwasher.
Do not bend the element plug
terminals_
Do not attempt to clean, adjust
or in any way repair the plug-in
receptacle,
24
Loading ...
Loading ...
Loading ...