Loading ...
Loading ...
Loading ...
104 - CLEANING AND MAINTENANCE 914779727/C
Manual cleaning of reservoir and
hydraulic circuit
1. Touch the OTHER FUNCTIONS
button on the "main menu" (in the main area
).
2. Touch the sub-menu button (in the
lower area ).
3. Touch the CLEAN RESERVOIR
button.
Preliminary operations
4. Open the door and pull the loading drawer
out of its housing.
fig. 1
5. Insert the funnel provided in the loading
drawer.
fig. 2
6. Pour the water (using a bottle or a
measuring jug) until the reservoir max. level
indicator light comes on (in the
information area on the right) to show
that the max. level has been reached
(the reservoir contains about 800 ml of
water).
fig. 3
7. At the end, remove the funnel and place the
loading drawer back in its place.
fig. 4
8. Close the door.
9. Touch the CONFIRM button to confirm
that you have finished filling the reservoir.
The appliance starts the function using the
parameters set.
Cleaning the water circuit
• During this process, the overflowing of water
inside the oven cavity is not intended as a
malfunction, rather it is part of the rinsing
procedure.
This function allows the reservoir and
the hydraulic circuit of the appliance to
be cleaned.
Use cold tap water which is not too
hard, softened water or still mineral
water.
Do not use distilled water, tap water
with a high chloride content (> 40 mg/
l), or other liquids.
Loading ...
Loading ...
Loading ...