Smeg SOP6104S2PG Oven Galileo Pyro steam

User Manual - Page 4

For SOP6104S2PG.

PDF File Manual, 54 pages, Read Online | Download pdf file

SOP6104S2PG photo
Loading ...
Loading ...
Loading ...
62 - PRECAUTIONS 914779727/C
personnel in accordance with
current standards.
Have the electrical connection
performed by authorised
technical personnel.
The appliance must be
connected to earth in
compliance with electrical
system safety standards.
Use cables withstanding a
temperature of at least 90 °C.
The tightening torque of the
screws of the terminal supply
wires must be 1.5 - 2 Nm.
If the power cable becomes
damaged, contact technical
support immediately to arrange
for it to be replaced in order to
avoid possible hazards.
WARNING: while positioning
the appliance, make sure that
the power supply cable is not
caught or damaged.
Always use any necessary/
required personal protective
equipment (PPE) before
performing any work on the
appliance (installation,
maintenance, positioning or
movement).
Before performing any work on
the appliance, switch off the
power supply.
Allow the appliance to be
disconnected after installation,
via an accessible plug or a
switch in the case of a fixed
connection.
Fit the power line with an all-
pole circuit breaker with a
contact separation distance
sufficient to provide complete
disconnection in category III
overvoltage conditions,
pursuant to installation
regulations.
WARNING: Make sure that
the appliance has been
switched off and disconnected
from the mains power supply or
that the mains power has been
switched off before replacing
the interior lighting bulbs.
The bulbs used in this
appliance are specific for
household appliances; do not
use them for home lighting.
This appliance can be used up
to a maximum altitude of 4,000
metres above sea level.
For this appliance
Do not rest any weight or sit
on the open door of the
appliance.
Take care that no objects are
stuck in the doors.
Do not install/use the
appliance outdoors.
(on some models only) Only
use the temperature probe
provided or recommended by
the manufacturer.
Temperature probe (if present)
Do not touch the rod or the tip
of the temperature probe after
use.
Loading ...
Loading ...
Loading ...